Windows Mount iSCSI Hard Drive Record
Windows Mount iSCSI Hard Drive Record
First you have to have an iSCSI hard drive, usually the average NAS has to provide iSCSI hard drive creation
Then we can mount iSCSI hard drive in Windows, this mount iSCSI hard drive system for Windows 10
Press the keyboard WIN-R to open the run window and start iscsicpl.exe, as shown below
Discover tab, click on the "Discover portal" and enter the ip address of the iSCSI hard drive service
Click on the target again, then link the iSCSI hard drive, open windows disk management to see hanging on the iSCSI hard drive
Create a new volume for the newly mounted iSCSI hard drive and format it to use the iSCSI hard drive
💘 相关文章
- linux制作windows启动盘“出错: 设备上没有空间“解决方法
- 一款基于go开发的Windows系统proxy客户端-Clash
- windows系统下解决连接ipv6网络很慢的方法
- 如何在Windows,Linux,Mac系统查看 USB 裝置的 PID 及 VID?
- Windows挂載iSCSI硬盤記錄
- 純净版,官方原版的windows下載
- 再也不用Windows了
- How to query the hard disk usage time of various distribution Linux systems
- fuse: bad mount point `': Transport endpoint is not connected的解决方法
- Mount: special device /dev/sdb1 does not exist error resolution record